Two pump motors. Two drive motors.
Twice the dedicated hardware of most cleaners. 8,500+ gallons per hour, with active scrubbing brushes and Clear app control — without the UV-C lamp.
Clear S
Cleans the entire pool. In one cycle.
Vacuums, scrubs, and filters at 8,500+ gallons per hour. Climbs walls. Cleans the waterline. Runs from the Clear app on iOS or Android.
1
14
Clear S
Clear S
Vacuums, scrubs, and filters the floor, walls, and waterline at 8,500+ gallons per hour. Same hardware as Clear UV — without the UV-C lamp.
- 8,500+ gal/hr
- Walls + waterline
- Clear app
$1,749$2,749
Financing available at checkout. Taxes and shipping calculated at checkout.
Check availability and pricing with our team.
Your card is authorized at order and charged when Clear S ships. Cancel anytime before shipment.
Buy on Certified Site- Free US shipping
- 30-day returns
- US-based support
Clear S vacuums, scrubs, and filters in-ground residential pools at 8,500+ gallons per hour. Same cleaning hardware as Clear UV — without the built-in UV-C lamp. Floors, walls, and waterline, every cycle.
- Floors, Walls, and Waterline - Every cycle. Up to 50 ft pool length, 2.5 to 16.4 ft working depth, with a 59 ft anti-tangle cable
- 8,500+ Gallons per Hour - Two pump motors and two drive motors push more than 2 times the flow of typical residential pool robots
- Front + Rear Active Brushes - Two scrubbing brushes lift algae, leaves, and pollen straight into the UltraBin
- 1 Micron UltraFilter Media - Four-panel basket with 1 micron fine and 180 micron coarse panels captures pollen, silt, and dead algae
- Six Cleaning Modes - Regular (2 hr), Ultra (3 hr), Fast (1 hr), Floor only, Waterline only, or Custom in the app
- Free Clear App - Weekly schedules, manual joystick drive, and real-time pool temperature. iOS and Android. Pair in under a minute
- 8,500+ gal/hr More than 2× the flow of typical residential pool robots.
- 50ft max pool length In-ground residential pools. 59 ft anti-tangle cable. 2.5–16.4 ft depth.
- 2 hr typical cycle Six modes including Fast (1 hr), Regular (2 hr), and Ultra (3 hr).
How it cleans
Cleans the
entire pool.
In one cycle.
Floors, walls, and waterline. 8,500+ gph.
Two pump motors push 8,500+ gallons per hour through fine-mesh UltraFilters. Two drive motors carry the robot up walls and along the waterline. Front and rear active scrubbing brushes lift algae and debris into the bin — without your hands in the water.
What it does.
Floors, walls, and waterline.
Wall-climbing path logic for in-ground residential pools up to 50 ft long, with a 59 ft anti-tangle cable.
Schedule from anywhere.
Free Clear app for iOS and Android. Weekly schedules, manual joystick, and real-time water temperature.
8,500+ gph flow.
More than 2× the flow of typical residential pool robots. A pool gets filtered multiple times in one cycle.
Front + rear brushes.
Two active scrubbing brushes lift algae, leaves, and pollen straight into the UltraBin.
Live water temperature.
Real-time pool temperature reads in the Clear app — check before you step in.
Six cleaning modes.
Regular (2 hr), Ultra (3 hr), Fast (1 hr), Floor only, Waterline only, or Custom — pick what your pool needs.
U.S.-based phone support.
Call 737-327-3005 Monday–Friday and you'll talk to the team that builds and ships the robot. No bots.
In the water
Real pools.
Real debris.
Real cycles.
No renders. No concept art.
Footage from in-ground pools we test in every day — walls climbed, leaves vacuumed, waterline passed, robot lifted out by the handle.
Inside Clear S
Twelve features.
Twelve proof points.
Specs and features any owner can verify against another robot — the same cleaning hardware as Clear UV, without the UV-C lamp.
-
Three jobs
Vacuum. Scrub. Filter.
The same cleaning hardware as Clear UV — without the UV-C lamp. Three jobs, one robot, one 2-hour cycle.
-
Coverage
Floors, walls, waterline.
Every surface, every cycle. Up to 50 ft pool length, 2.5–16.4 ft working depth.
-
Navigation
Onboard gyro + accelerometer.
Tracks orientation and movement in real time. Coverage tightens after the first 2–3 cycles.
-
Flow rate
8,500+ gallons per hour.
Two pump motors and two drive motors — more than 2× the flow of typical residential pool robots. A typical pool gets filtered multiple times per cycle.
-
Brushes
Front + rear brushes.
Two active scrubbing brushes lift algae, leaves, and pollen into the bin.
-
Waterline
Cleans the waterline.
Every cycle. Not an upgrade. Not a separate mode you have to remember.
-
Filtration
1 µm UltraFilter media.
Four-panel UltraFilter basket. 1 µm fine and 180 µm coarse panels capture pollen, silt, and dead algae before they recirculate.
-
Debris bin
Easy-empty UltraBin.
Lifts straight out by the handle. Rinse with a hose. About 30 seconds.
-
Temp sensor
Live water temperature.
Real-time pool temperature reads in the Clear app every cycle.
-
C9 chip
Custom pool silicon.
C9 coordinates the four motors, gyroscope, and app — in real time.
-
Clear app
iOS and Android.
Schedule, drive, and monitor cycles. Free. Pair in under a minute.
-
Scheduling
Weekly timer.
Set 2–3 cycles per week and forget. Drop a one-off cycle after a storm or pool party.
What Clear S does
Handles what
your pool throws
at it.
Storms, pollen, algae blooms, and the waterline. Clear S vacuums, scrubs, and filters at 8,500+ gph — in a single 2-hour cycle. Same cleaning hardware as Clear UV, without the UV-C lamp.
-
8,500+ gallons per hour.
Two pump motors and two drive motors push more than 2× the flow of typical residential pool robots through fine-mesh UltraFilters.
-
Front + rear active brushes.
Two scrubbing brushes mechanically lift algae, pollen, and debris off floors, walls, and the waterline — into the bin, not back into the water.
-
Climbs walls. Cleans the waterline.
Onboard gyroscope and accelerometer track movement in real time. Coverage tightens after the first 2–3 cycles.
-
Free Clear app.
Schedule weekly cycles, drive manually with the on-screen joystick, and check real-time pool temperature. iOS and Android. Pair in under a minute.
-
Up to 50 ft pool length.
59 ft anti-tangle cable. Working depth 2.5–16.4 ft (0.8–5 m). Cleans gunite, tile, vinyl, fiberglass, and pebble surfaces.
-
U.S.-based phone support.
Call 737-327-3005 Monday–Friday. The U.S. team that builds the robot picks up. No bots, no outsourced tier-one.
Three jobs, one cycle
Vacuum.
Scrub.
Filter.
Three jobs that used to need separate equipment, in one robot, in one 2-hour cycle — without the UV-C lamp on Clear UV.
Tech specs
All specs verified against the Clear S user manual. Full setup, care, and troubleshooting live in Clear S manual (PDF) and Support.
Ratings & reviews
Reviews will appear here as they come in. Questions? Our team is a quick call or message away.
Questions
- Does Clear S climb walls and clean the waterline?
- Yes — every cleaning mode covers floors, walls, and the waterline. Wall climbing depends on pool shape, water clarity, and pool chemistry; the manual lists the supported ranges (pH 7.0 – 7.8, free chlorine ≤ 4 ppm, salt ≤ 5,000 ppm).
- What pool sizes does Clear S fit?
- In-ground residential pools up to 50 ft long, with a working depth of 2.5 – 16.4 ft (0.8 – 5 m). The 59 ft anti-tangle cable lets the robot reach every corner when the power supply is centered along the long side of the pool.
- What cleaning modes does Clear S have?
- Six built-in modes: Regular (2 hr), Ultra (3 hr), Fast (1 hr), Floor only (2 hr), Waterline only (2 hr), and a Custom mode you configure in the Clear app.
- How do I control it?
- Basic cleaning runs from the Power Supply (Control Box). For schedules, manual joystick driving and water temperature, use the Clear app over Bluetooth + Wi-Fi. Pairing steps are in the Clear S manual (PDF).
- How often do the UltraFilters need replacing?
- Rinse the UltraFilter basket after every cleaning cycle. The four UltraFilter panels (1 µm / 180 µm precision) should be replaced every 3 – 6 months depending on pool conditions. Each robot ships with two sets — one preinstalled in the UltraBin.
- Where do I get service or parts?
- Start with Support or call 737-327-3005 — we will point you to the fastest path.
Choose your Clear
Two robots.
One difference.
Same cleaning hardware on both. Clear UV adds a built-in UV-C lamp that sanitizes water as the pump cycles it through. Clear S leaves the lamp out and saves you $250.
Clear UV
Flagship — with the built-in UV-C lamp
- Patented in-robot UV-C lamp
- 8,500+ gal/hr flow (2× typical)
- Front + rear active scrubbing brushes
- Floors, walls, and waterline
- Free Clear app for iOS & Android
Clear S You're viewing
Same robot — without the UV-C lamp
- 8,500+ gal/hr flow (2× typical)
- Front + rear active scrubbing brushes
- Floors, walls, and waterline
- Free Clear app for iOS & Android
- No UV-C lamp (standard on Clear UV)
Not sure which fits your pool? Talk with our team — or call 737-327-3005. Most owners decide in one conversation.
Clear S — Details
Clear S is the same robot as Clear UV — without the built-in UV-C lamp. Two pump motors, two drive motors, fine-mesh UltraFilters, front and rear active scrubbing brushes, and the Clear app. For owners who already run UV or ozone at the pump, or who prefer to handle sanitation through chlorine or salt.
- 8,500+ gallons per hour through fine-mesh UltraFilters — more than 2× the flow of typical residential pool robots
- Front and rear active scrubbing brushes lift algae, leaves, and pollen into the UltraBin
- Onboard gyroscope and accelerometer track movement — coverage tightens after 2–3 cycles
- Six cleaning modes (Regular, Ultra, Fast, Floor only, Waterline only, Custom). A typical pool finishes in about 2 hours
- Four-panel UltraFilter basket: 1 µm fine + 180 µm coarse panels capture pollen, silt, and dead algae before they recirculate
- Free Clear app for iOS and Android: weekly schedules, manual joystick, real-time pool temperature
- For in-ground residential pools up to 50 ft long. 59 ft anti-tangle cable. Working depth 2.5–16.4 ft
- U.S.-based phone support — call 737-327-3005
Want a UV-C lamp built into the robot? Explore Clear UV, our flagship — same robot with the UV lamp added, for $250 more.